custom heat seal food tray sealing sealer film roll
BrandYunshanProduct originChinaDelivery time15-45 daysSupply capacity600 tons per month capacity Multi-Material Compatibility:Reliable heat seal with PET, PP, PLA containersFreezer
View product
This matrix is for buyers sourcing a biodegradable food containers wholesale programme that has to hold up in real foodservice: it sets the YP103 10″ three-compartment sugarcane bagasse plate — compostable, microwave and freezer safe, with portion-isolated wells — against the volumes, certificates and custom-print options a supplier has to document. Use it to compare wholesale disposable tableware formats on the terms that actually decide the order: minimum quantity, certification set and logo printing.
Work through these in order and the specification table below becomes a shortlist instead of a catalog. Each answer points to the module that resolves it.
Count what lands on the plate at the same time. A single main points to one well; a main plus two sides points to three wells, the layout used by the 10″ 3-compartment plate.
Check tray cavities, dome lids and delivery-bag depth before confirming a diameter. The format documented on this page is a 10″ plate.
Hospital reheating, school tray lines, catered events and QSR hand-off stress different attributes: heat, portion isolation, stacking and transport rigidity.
Buyer decision: the documented run size is 100,000 pieces and the documented format is a 10″ plate with three compartments. If your menu cycle needs a smaller diameter or a different well count, raise it during specification confirmation rather than after a purchase order is issued.
| Product number | No. YP103 |
| Format | 10″ plate with three compartments (tripartite design) |
| Material | Sugarcane bagasse pulp — described as 100% natural sugarcane bagasse pulp, a renewable fiber |
| Heat and cold use | High temperature resistance stated; designed for hot and cold food applications and safe in microwaves and freezers |
| End of life | 100% biodegradable; compostable nature supports waste-management cycles under organic disposal programs |
| Certifications | FDA, BSCI, FSC, BPI, BRC, KOF-K, OK COMPOST HOME, SEEDING |
| Minimum order quantity | 100,000 pieces |
| OEM / ODM | Custom logo or color print available; printed or embossed logo acceptable |
| Applications listed | Home, Restaurant, Hotel, Bar, Wedding |
| Price | On request — quote-based, no online checkout |
The tripartite layout keeps a main and two sides in separate wells, which isolates portions without flavour cross-contamination — useful when a menu item must stay crisp or a sauce must not travel.
One open field for a single dish or a build-your-own line. Fewer wells means faster filling and simpler stacked storage, but sauces and sides share the same surface.
A practical middle step when the menu is a main plus one accompaniment. Keeps a wet item away from a dry one without giving up plate area to a third well.
Built for tray-line service where a full meal is assembled in one pass: protein, starch, vegetables and two sides. Review tray width and lid options before standardising.
A lid and base in one moulding, which cuts a separate lid inventory. Best suited to takeaway and delivery, where the closed pack protects food in transit.
| Attribute | Sugarcane bagasse pulp (YP103) | Other molded plant-fiber pulp | Coated paper / paperboard | PLA-lined board | EPS foam |
|---|---|---|---|---|---|
| Heat in service | High temperature resistance stated for this plate | Varies with pulp density and binder | Coating and grammage set the limit | PLA softens earlier than fiber — confirm the rated temperature | Holds hot and cold but deforms near high heat |
| Microwave | Stated microwave safe | Check the individual SKU sheet | Usually limited; verify before reheating | Not the first choice for reheating | Not recommended |
| Freezer | Stated freezer safe | Generally suitable | Generally suitable when dry | Verify per SKU | Suitable |
| Grease and moisture | Designed for hot and cold food applications | Adequate for moist foods; test oil-heavy menus | Coated grades resist grease better than uncoated | Lining limits grease passage | Unaffected by moisture |
| Rigidity in hand | Refined fibre moulding balances strength with light weight, as described on the page | Similar family of performance | Softer than moulded pulp | Softer again once lined | Rigid but brittle on thin walls |
| Compost claim | Stated 100% biodegradable; certification list includes BPI, OK COMPOST HOME and SEEDING | Depends on grade and certification held | Only certified compostable grades qualify | PLA lining can change the accepted disposal route | Not compostable; restricted in many markets |
| Choose it when | Hot and cold mixed meals with portion control, plus a print requirement | You want moulded-fiber performance from an alternative pulp supply | Menus are drier, lighter and cost-sensitive | A clear barrier is the priority and heat exposure is low | Only for legacy programmes being phased out |
How to use this table: it is category-level guidance for early shortlisting. Confirm heat, grease, microwave and compostability performance, plus the certification set, against the exact SKU you put on the quote.
Eight marks appear in the specification block of the current product page. Pull the matching documents into your supplier file before a specification is signed off.
Three wells map onto a main plus two sides and keep portions separated on a fixed tray line. Confirm tray cavity size and stacking height against the 10″ format.
Multi-well plates support controlled portions, and the stated microwave safety matters when a tray is reheated on the ward. Verify reheat temperature against your own protocol.
Compartment isolation keeps textures and sauces apart for residents on modified diets. Ask for the plate depth if cutlery clearance is a constraint.
A reusable-look disposable that suits buffet and plated service without a washing-up line. Custom embossing puts a facility or brand mark on the rim.
The product page lists hotel, bar and wedding applications, so the 10″ three-well plate is aimed squarely at catered plated service where presentation still counts.
Speed of filling and clear stacking drive the choice here; a single well or hinged format often wins, with the print option carrying the brand.
Closed, hinged packs protect food in transit; multi-well plates suit plated delivery. Check bag and lid dimensions before locking a format.
Weight and packing density dominate, alongside freezer-safe storage and reheating. Bring your trolley dimensions to the specification conversation.
The plate is priced on request, so the buying path runs through a quote list rather than a checkout. Here is how the interface works on the product side.
Send your format, print requirement and delivery destination. Specification confirmation and sample approval come before any production commitment.
Keep adjacent product options together for a faster catalog comparison.
BrandYunshanProduct originChinaDelivery time15-45 daysSupply capacity600 tons per month capacity Multi-Material Compatibility:Reliable heat seal with PET, PP, PLA containersFreezer
View product
PET Fruit and Vegetable Tray LidsMinimum order quantity: 100000 pieces Material: Sugarcane Bagasse Pulp OEM/ODM: Custom logo or color print available Certificates: FDA,BSCI,FSC,BPI
View product
PET Fruit and Vegetable Tray LidsMinimum order quantity: 100000 pieces Material: Sugarcane Bagasse Pulp OEM/ODM: Custom logo or color print available Certificates: FDA,BSCI,FSC,BPI
View productthe current product page states 100,000 pieces as the minimum order quantity for no. yp103. confirm the live terms with the sales team when you submit a quote request, since volumes and pricing are handled case by case.
yes. sample approval sits inside the stated ordering path: inquiry and specification confirmation first, then sample approval, then placement of order, then production and delivery.
the page lists oem/odm custom logo or colour print as available, and states that printed or embossed logos are acceptable. artwork and placement are agreed during specification confirmation.
yes. it is described as designed for both hot and cold food applications and safe to use in microwaves and freezers, with high temperature resistance listed among its features.
the specification block lists fda, bsci, fsc, bpi, brc, kof-k, ok compost home and seeding. request the matching documents so the certificate set can be checked against your own market requirements.
this page documents a 10″ plate with three compartments. no other diameter or well count is stated for no. yp103, so raise any alternative format, tray-line fit or lidding requirement during the specification conversation.